Jewellery Making >> Non-Silver Findings & Resins
| |
Items 1 - 12 of 14
|
|
Leather thong, abalone 'Mother of Pearl' shell, Solid Water resin, Lisa Pavelka Magic-Glos, wires, nickel plated tie pins and more
|
|
|
|
18 gauge (1.2mm) wire on 5.5 m reels in 2 colours
This lacquer-coated wire is flexible and easily worked, and provided that the design lies flat ...
More >
|
|
|
|
|
22 gauge (0.7mm) wire on 11m reels in 4 colours
This lacquer-coated wire is flexible and easily worked, and provided that the design lies flat ...
More >
|
|
|
|
|
A thin sheet of real mother of pearl shell for inlaying into silver and applying as decoration. This precious material can be cut into small pieces ...
More >
|
|
|
|
|
Quality 2mm thick, black leather thong cut to length. Attached a spring end at both ends and a hook to one of the spring ends to complete the loop. ...
More >
|
|
|
|
|
Use super glue to attach these nickel plated bar brooch backs onto your polymer clay creations. Packs of 10, 25mm
More >
|
|
|
|
|
Brighter colours and finer copper wire yarns enable the knitter and weaver to create jewellery, decorative articles and one-off garments. For ...
More >
|
|
|
|
|
0.315mm soft copper wire yarns for knitting, crochet, weaving or jewellery making. BUY MORE & SAVE! buy 10 or more of one colour and save ...
More >
|
|
|
|
|
Ear studs for making earrings. These studs have 6mm pads so that baked polymer clay pieces can be super glued on. Packs of 10 pairs in gilt or ...
More >
|
|
|
|
|
Fish hook ear wires for making earrings. Packs of 10 pairs in gilt or silver plate finish.
The earrings below are made from polymer clay ...
More >
|
|
|
|
|
Attach hook to one spring end to make a clasp on a leather thong or silk cord. Packs of 20 in gilt or silver plate ...
More >
|
|
|
|
|
A crystal clear resin which can be used to create a gloss finish, cabochons, lenses, three dimensional effects such as water droplets and raised ...
More >
|
|
|
|
|
A two part resin which dries rock hard and crystal clear. It can be tinted with oil paints to simulate enamel effects on baked polymer clay or fired ...
More >
|
| |
Items 1 - 12 of 14
|
|
|