Search Catalogue: search click here for search tips
Home >> Resource File >> Polymer Clay Buttons, more ideas

More Polymer Clay Buttons with Sue Heaser

a collection of buttons designed by Sue HeaserThe working possibilities of polymer clay are endless. By blending fully pigmented colours with a translucent colour it can be made to emulate semi-precious stones or it can be inlaid with coloured resin to create faux enamel. The surface can be brushed with pearlescent powders to make polymer clay 'metal' or it can be carefully blended to simulate highly polished wood.

Here we have chosen to use Lisa Pavelka texture stamps and the resultant buttons could be further enhanced using the afore mentioned techniques. Pictured right are a collection Sue Heaser's imaginative and fun buttons.

In addition to the materials specified on our How to Make Buttons page, you will need a texture sheet (Sue has used a Lisa Pavelka texture stamp Decorative, Swirly Q), a little talcum powder and a round button

Step 1

Roll out the clay (we have used an acrylic roller) on the tile between the rolling guides, or use a pasta machine to make a sheet about 3mm thick. Leave the clay sheet on the tile. This image is taken from our page on How to Make Buttons

polymer clay is rolled to 3mm deep

Step 2

Lightly dust the surface of the polymer clay with talcum powder to prevent the stamp sticking. Lay the stamp on the clay surface and press all over the back to impress it into the clay. Peel back one corner to check it has made a deep enough impression and if not, replace and press on some more.
a Lisa Pavelka stamp is used for texture
Step 3

Cut out the buttons as before (see our How to Make Buttons page) and indent the centre with the side of a round button to make a thread channel. Pierce holes at each end of the thread channel. Bake on the tile according to the clay manufacturers’ instructions – usually about 20-30 minutes at 130°C. When cool, remove from the tile. If the buttons have slightly rough edges, you can sand them with fine sandpaper.
the edge of the button makes the groove for the thread
Click here to view the range of Fine Cut CuttersThe End Result

Four sets of buttons in four fun colours of polymer clay! Vary the texture by using items found around the house or choose from the stamps and textures sheets on this site.  The various cutters offer a vast choice of shapes and sizes.
finished polymer clay buttons
These fun soldier toggles were designed and made by Sue Heaser. The tiny details have been picked out using different coloured clays and thread holes are incorporated into the design by using the same coloured thread as the yellow braiding on the soldiers uniform Tiny soldier toggles made from polymer clay
 
 
 
 
 
George Weil & Sons is a limited company registered in England and Wales.
Registered number: 00321890. Registered office: Old Portsmouth Road, Peasmarsh, Guildford, GU3 1LZ
Tel: 0 (+44) 1483 565800 · Fax: 0 (+44) 1483 565807 · Email: info@polymerclaypit.co.uk